| Features: | Benefits: |
| Torque range from 0.15 to 1400 Nm (0.11 to 1032 Ft.lb). | Transducers used in line with screwdrivers – pneumatic tools – impulse tools – electric nutrunners and spindles. |
Strain gauges transducer
– sensitivity 2mV/V.
– accuracy +/-0.35% full scale. | The most accurate and reliable type of torque transducer. |
Built-in smart chip memory with:
Calibration features: type of transducer – sensitivity – nominal load – serial number.
Maintenance information: date of last calibration – maximum torque applied on transducer. | No need for transducer selection.
The data collector automatically recognises the transducer connected.
No risk for the operator by selecting a wrong type of transducer. |
| Unique contact system preventing the common problem of "brush bounce". | Transducers can be used in line with impulse tools, (not impact tools – use CC series transducers). |
| Angle counting system 0.5° resolution | Checks all types of joints, hard and soft. |
| Same size for Torque or Torque & Angle transducers | Easy access to all applications. |
Digital connection between data collector and transducer.
Torque value converted to a digital signal in the transducer. | Cable length has no effect on accuracy.
Reliability of torque values transmitted to the data collector.
Only one type of transducer cable needed.
Easy to recalibrate by modifying the sensitivity coefficient.
No hardware adjustment. |
