AFD Drilling Pneumatic Drive & AFD 205 and AFD 215 Auto feed pneumatic drills ALSO PDF

AFD 415 auto feed pneumatic drill & AFD425 auto feed drill

AFD625 auto feed drill AFD accessories Catalog of drills (PDF)

AFD GUARD AND SILENCERS (PDF)

AFD Control Blocks AFD Control Block PDF Modular Control Block options
A1-Full Feature Block Pneumatic signal ports for stop, start and cycle completionFacility for using proximity switches to sense depth and datum positionsControl of feed and retract speed
A-6 Simple Control Block Forward and retract ports for control via remote pneumatic valves.Facility for using proximity switches to sense depth and datum positions

Auto Feed Drill Dimensions

AFDE Drilling Electric Drives PDF

AFDE200 Auto-feed electric drill Comprehensive range of product For single spindle operations to multi spindle processes. Pneumatic and electric drive from 0.3 - 3.0 HP (0.22 to 2.2kW) with thrusts from 72-600lbf (320 to 2670N).

AFDE 400 Electric Auto Feed Drill & AFDE600 /610 /620 AutoFeed Electric Drills SPEC PDF AFDE Auto-feed electric drill applications

Auto-Feed Drilling and Tapping Applications

CHUCKS and OUTPUTS & Feed CONTROLS (PDF)

Desoutter AutoFeed Drill Collets Interchangeable modular output spindles including multiple spindle and tapping heads. (PDF)

CONTROL BLOCKS (PDF)

AUTO FEED TAPPING UNITS

AFD Tapping - Electric Drives (PDF)

AFD Tapping - Lead Screw (PDF) 

AFD Tapping - Pneumatic Drive (PDF)AFD470 Tapping unit

Desoutter screwdrivers are available in pistol grip, inline with trigger start, lever or push to start operation. Also, tools are available in auto shut off, non-shut-off and high-low torque capability. Torque ranges from inch ounces to foot pounds.

Air Scribes Also... CP-9361

Desoutter VP2X Engraving Pens

Auto Reverse Screwdrivers in straight case and pistol grip.

Tool reverses at desired torque

Compression Tools

& Crimping Tools

RIVETING AND COMPRESSION TOOLS

Three types of C Yoke compression tools are available.
C Yoke tools are used where there is open access (up to 2 1/8' / 54mm reach)

Note: the amount of reach required is determined by the distance from the rivet centreline to the accessible edge of the workpiece.

There are two types of 'alligator' jaw compression tools available.
'Alligator' jaw tools are used where there is restricted access (up to 9 1/8' / 232mm reach)

Note: the amount of reach required is determined by the distance from the rivet centreline to the accessible edge of the workpiece.

Grinders Die Grinders

Grinders 5 to 9 inches (PDF)

Grinders 2 to 4 inches Demolition Tools - Cone wheel grinders

CVI ConceptCVIC-

Tightening Controller

ERP Pistol grip

DC fastening system

Manual CVIC

90x90 Aircraft drills

Collets and Chucks

New SLE high power electric screwdriver - Straight case version

SLE- One Screwdriver – Many Solutions

With the increasing pressures on the manufacturing sector to produce product faster and to a higher standard, Desoutter has launched a new range of intelligent screwdrivers.

Aimed at improving quality and productivity the SLE range will include a number of beneficial features such as;

- Up to 4 different torque settings on a single tool
- A fastening assurance system to ensure joint integrity
- Screw counting facility
- I/O interface for communication with ancillary equipment or displays
- High torque rundown option to overcome problems with premature shut off such as on thread cutting/forming screws or mis-aligned holes
- A slow start facility for screw/thread alignment
- Push, lever, angle head and pistol grip models to provide the operator with the correct tool for the application
- Increased durability of the tools with a service life potentially triple over product already in the market

NEW... ECL Programmable DC electric screwdriver

Air Scribes Also... CP-9361

Desoutter VP2X Engraving Pens

T025189 CP4450-2 2X 2580 12.7 x 50.8 1/2 x 2
T025190 CP4450-3 3X 2160 12.7 x 76.2 1/2 x 3
T025191 CP4450-4 4X 1740 12.7 x 101.2 1/2 x 4

T022961 CP4444-RURAB 2X 2580 12.7 x 50.8 1/2 x 2
T022962 CP4444-RUSAB 3X 2160 12.7 x 76.2 1/2 x 3
T022963 CP4444-RUTAB 4X 1740 12.7 x 101.2 1/2 x 4
T022965 CP4447-RUSAB 5XB 1560 12.7 x 101.2 3/4 x 2 11/16
T022912 CP4447-RUTAB 9XB 1140 19.1 x 98.4 3/4 x 2 7/8
T022964 CP4447-RUVAB 7XB 900 19.1 x 147.6 3/4 x 5 13/16

Riveting hammers

Vibration reduced

The vibration reduced riveting hammer offers the power and control needed to drive 1/8' to 1/4' (3.1mm to 6.4mm) rivets used in the aircraft industry and other assembly operations.

The unique features of these tools include a progressive 'teasing' throttle for improved controllability.

Our riveting hammers can also be used for a variety of other operations including chipping, scraping, metal cutting, peening and more.
Standard hammers

The standard riveting hammer CP4444 offers the power and control needed to drive 1/8' to 1/4' (3.1mm to 6.4mm) rivets used in the aircraft industry and other assembly operations. The more powerful CP4447 is able to drive rivets up to 3/8' (9.5mm).

The unique features of these tools include a progressive 'teasing' throttle for improved controllability.

CP riveting hammers can also be used for a variety of other operations including chipping, scraping, metal cutting, peening and more.

Desoutter Hi-Lo Torque Drivers

Typical HLT Cycle 1. Tool starts to cut/form thread - direct drive2. Thread is cut/formed, run down continues - direct drive3. Depth stop touches component, drive engages clutch4. Final torque is achieved, clutch operates and air supply is shut off

T018046 CP0610 GALED 1 Hole 3-Jaw D Outside
T018041 CP0610 GALEL #5 Spline Integral 3-Jaw D Outside
T018253 CP0610 PALED 1 Hole 3-Jaw D Inside Trigger
T018042 CP0610 PALEL #5 Spline Integral 3-Jaw D Inside Trigger
T024059 CP6060 SASAB 3/4 Hole 2-Jaw Pistol
T024060 CP6060 SASAK 1 Hole 2-Jaw Pistol
T024058 CP6060 SASAR 3/4 Friction Ring 2-Jaw Pistol
T024425 CP6110 GASED 1 Hole Twin Lobe D Outside
T024426 CP6110 GASEL #5 Spline Integral Twin Lobe D Outside
T025100 CP6110 PASED 1 Hole Twin Lobe D Inside Trigger
T025101 CP6110 PASEL #5 Spline Integral Twin Lobe D Inside Trigger
T025309 CP6760 RS 3/4 Hole 2-Jaw Pistol
T025311 CP6760 RS1 1 Hole 2-Jaw Pistol
T025310 CP6760 RSR 3/4 Friction Ring 2-Jaw Pistol

Impact Tools (PDF) for high torque applications

Working torque max: 270-1695Nm (199-1249 ft.lb)
CP have developed a range of 7 clutch types to meet the differing demands of our customers' applications. No single clutch is perfect for every type of joint, so we give you the choice to make your job easier. There are also a choice of handles and trigger configurations depending on the tool size. This enables the operator to work in the best ergonomic way for the job. The tools are of a simple 3 piece construction for ease and speed of servicing. Durable steel clutch housings (zinc option on some models)
These tools are suitable for high production rates such as those on production/ assembly lines, where high durability is used and the tools are used frequently.

Torque ranges should be used as a guide only. Final torque will depend on the joint, operating pressure and drive accessories.

T021887 CP6031 HABAD 3/8 Pin 2-Jaw Pistol
T021884 CP6031 HABAK 1/2 Pin 2-Jaw Pistol
T021885 CP6031 HABAV 7/16 Quick Change 2-Jaw Pistol
T021888 CP6041 HABAB 1/2 Pin 2-Jaw Pistol
T022331 CP6041 HABAR 1/2 Friction Ring 2-Jaw Pistol
T021890 CP6041 HABAS 7/16 Quick Change 2-Jaw Pistol
T025285 CP6300 RSR 3/8 Friction Ring Single Dog Pistol
T025214 CP6500 RS 1/2 Pin Double-Dog Pistol
T025216 CP6500 RSR 1/2 Friction Ring Double-Dog Pistol
T025215 CP6500 RSS 7/16 Quick Change Double-Dog Pistol
T025312 CP6540 RS 1/2 Pin Rocking-Dog Pistol
T025313 CP6540 RSR 1/2 Friction Ring Rocking-Dog Pistol
T025314 CP6540 RSS 7/16 Quick Change Rocking-Dog Pistol

Impact Tools (PDF) for high torque applications

Working torque max: 54-480Nm (39.8-353.7 ft.lb)

CP have developed a range of 7 clutch types to meet the differing demands of our customers' applications. No single clutch is perfect for every type of joint, so we give you the choice to make your job easier. There are also a choice of handles and trigger configurations depending on the tool size. This enables the operator to work in the best ergonomic way for the job. The tools are of a simple 3 piece construction for ease and speed of servicing. Durable steel clutch housings (zinc option on some models)

These tools are suitable for high production rates such as those on production/ assembly lines, where high durability is used and the tools are used frequently.

Torque ranges should be used as a guide only. Final torque will depend on the joint, operating pressure and drive accessories.

Nut Runners Automation Accessories (PDF) - Nut runner spring loaded shafts and offset heads

Desoutter D-170L Oscillating Cutting Tools

Cutting Tools html (PDF)

Finishing Tools HTML

Precussion Tools

Capacity:

Maximum hole is Ø 13mm (1/2”) relative to material thickness

Within maximum force of 24.0kN (5400lbs), material thickness should not exceed hole diameter.

To determine force required use formula: F = 3.14 x D x T x S

Where “F” is force (lbs); “D” is hole diameter (ins); “T” is thickness of material (ins); “S” is tensile strength of material (psi)

Or “F” is force (N); “D” is hole diameter (mm); “T” is thickness of material (mm); “S” is tensile strength of material (N/mm2)

(PDF CATALOG)

RACK FEED DRILLS portable drilling machine that is light and easily transportable. The rack feed drills offer feed controlled reaming and heavy duty drilling capability for on-site operations. The tool has a geared head and a bayonet nose drill jig that makes it ideal for difficult to reach applications.

Right Angle Drills

Drill collet accessories

Collets and Chucks

New SLE high power electric screwdriver - Straight case version Inline, Pistol grip and right angle head tools available

Desoutter Hi-Lo Torque Drivers

Typical HLT Cycle 1. Tool starts to cut/form thread - direct drive2. Thread is cut/formed, run down continues - direct drive3. Depth stop touches component, drive engages clutch4. Final torque is achieved, clutch operates and air supply is shut off

Srewdriver-Accessories

Screwdriver Bits

5/16" Hex Bits

Insert Bits

Screwdriver Bits and accessories (PDF)

REDIPOWER TOOLS

Light Industry Assembly Tools

The range of RediPower products have been developed for use in industries that do not demand the durability of the Industrial range such as maintenance departments and low volume manufacturers.

Defined as;
PVC, Aluminum and Wood Window and Door Manufacture
Furniture Manufacture
Maintenance, Repair and Overhaul (MRO)
Low Volume Manufacturers

Redi Power Chippers and Riveters, Scalers, Cutting and Cleaning Tools Dust Extraction Systems

NEW ! 2H16Tapping tool

Tension Tapping

Tappers-Hand held

D16 Hand Held Tapper

2F16 Tapping Tools Tapping Tools -

HAND Tappers

Tappers - Hand Held

Hose Reel Balancers

Hoists & Balancers

6159350350 DELTA4000
6159930430 DELTA5000
6159350370 SIGMA2001
54382 TMP-220 120 V USA TORQUE
54372 TMP-220 220V EURO TORQUE
54362 TMP-220 240V UK TORQUE

• Torque & angle measuring units
  All measuring units are able to read DRT, ST, CD, CF and TD transducers.
  SIGMA2000 is a torque measuring unit. It can memorize up to 1000 results including torque, date and time.
  DELTA4000 is a torque measuring unit with:
  - tightenings reports OK or NOK LED's
  - up to 5000 readings in memory + 5 curves
  - battery can operate up to 14 hours
  - perform statistics calculation on ISO, NF and CNOMO standards
  - connection to a PC via Deltapc software
  - different operating modes: Peak, Track, Sequence (route)
  DELTA5000 is a torque & angle measuring unit with:
  - All the features of the DELTA4000 plus the angle counting functions.
  Sigma 2001, Delta 4000 & 5000 Torque Meter
• Torque Measuring Software
• Sigma 2001 Torque Meters
• Precision TMP220 Torque Meter
• Measuring Tools Delta & Sigma PDF Torque Meters

H410N-Torque wrench For Hight torque applications

Angle Wrenches (Series 2D, 4H ) for high torque applications up to 77 foot pounds

SD SERIES High Torque ANGLE WRENCHES (PDF)