Features
Very small high precision fastening tool - With 'TARGET-TORK' clutch simultaneous drive disengagement/asir
shut-off clutch.
No wasted air - Screwdriver runs only when pressed onto fastener.
Stops instantly when torque has been achieved. (AX versions only)
No vibration - Less shut-off reaction - No ratchet dwell at the
end of cycle.
Higher reverse torque - For speedy fastener removal.
Consistent joint tightness - Low mean shift smoothes out joint
fluctuations between hard and soft.
Integral vacuum suction - 2A89 with 3 mm fem. hex. drive only.
Provides greater visibility at the screw head as bulky external vacuum
fittings are not required. The integral vacuum totally by passes the clutch,
thus preventing the ingress of debris into the mechanism. This unique
Desoutter feature helps to sustain clutch accuracy and prolong clutch
life. |
Features
High torque precision fastening tool - With 'TARGET-TORK' clutch simultaneous drive disengagement/air
shut-off clutch.
No wasted air - 2D89-A Models run only when pressed onto fastener
and stops instantly when torque has been achieved.
No vibration - Less shut-off reaction - No ratchet dwell at the
end of cycle.
Higher reverse torque - For speedy fastener removal.
Consistent joint tightness - Low mean shift smoothes out joint fluctuations
between hard and soft.
Cleaner assembly - Oil-free exhaust with DRYLINE lubrication-free
motor.
Automatic reverse increases productivity available on some models
- automatic reverse is suitable for running threaded captive fasteners,
rivet nuts, studs etc. The patented reverse mechanism allows fastener
placement and mandrel withdrawal in one fast, automatic movement. The
TARGET-TORK clutch ensures the correct clamping load is always applied
to the fastener before the motor automatically reverses |
