Air motors are versatile power sources which can be used to power many kinds of operations requiring rotational drive. They have many advantages over electric motors and often become the only feasible method of operation.
CP offers a wide range of rotating vane type air motors within a power range of 0.26kW (0.35hp) to 0.66kW (0.85hp). Most motors can be supplied as single rotation or reversible. Reversible motors have keyed shafts, while single direction motors can be supplied with threaded shafts or alternatives.
Advantages
• Compact, with high power to weight ratio.
• The output speed and torque can be simply controlled by regulating either the air pressure or air flow.
• No expensive control equipment is required.
• If a motor is loaded to a stalled condition and held there for any length of time, no damage is caused to the motor.
• When the load is released, the air motor will reach free running speed usually within one third to one half of a revolution.
• No risk of overheating either when continuously run or frequent stop/starts or reversing. Note that this condition assumes the use of an inline lubrication system.
• Reversing motors require simple control of air pressure into ports in the control top of the motor to determine direction of rotation. To reverse the direction of rotation takes milliseconds to complete.
• Resists moisture, dust, heat. Is generally explosion proof and can be used safely in most hazardous situations.
DM6, DM65 Series 
0.26kW (0.35hp)
Maximum Torque 8Nm (5.9 lbf ft), Non Reversible ............................
2DM6 Series
0.26kW (0.35hp)
Maximum Torque 8Nm (5.9 lbf ft), Reversible .....................................
HM Series
0.45kW (0.6hp)
Maximum Torque 41Nm (30 lbf ft), Non Reversible .............................
HM55 Series
0.63kW (0.84hp)
Maximum Torque 41Nm (30 lbf ft), Non Reversible .............................
2HM5 Series
0.66kW (0.85hp)
Maximum Torque 41Nm (30 lbf ft), Reversible ....................................
2H410 Series
0.66kW (0.85hp)
Maximum Torque 106Nm (78 lbf ft), Worm Drive Motors ......................
For more information please contact your local customer center or download the catalogs on right or link to the on line catalog sections above or below.
|
