Industrial Automatic Fixtured Self Feed Drills for production use

CP Desoutter & Ingersoll Rand ARO Fixtured Automatic Feed Drills

Self Feed and Auto Feed Drills by CP Desoutter and Ingersoll Rand

The AFD system can be built into simple semi-automatic as well as highly complicated transfer line machines using the basic drilling or tapping units and a range of clamps. Controls built into the head of the tool plus simplified circuitry enable the equipment to become fully automatic. Emphasizing it's versatility the AFD installation can be stripped down and the basic units used again in other machines when production requirements change. The AFD system can be used individually, or in combination with any number of drills or tappers.

It's control head is unique. An air signal starts and controls the drilling or tapping cycle. An air signal is also developed during the cycle which can be utilized, with suitable circuitry, to supply pilot air to actuate other drills, indexing tables, or clamping devices as well as providing a cycle completion signal.

Auto Feed Drill Catalogs
CP Desoutter Auto Feed Drills PDF	CP Desoutter Auto Feed Drills	ARO Ingersoll Rand Auto Feed Drills PDF	Ingersoll Rand Auto Feed Drills PDF
Auto Feed Drill Model Listings
CP Desoutter AFDE200 Electric Drill / Tapping Tool .34 hp motor 72 ftlb. thrust 850-11950 rpm 3.43 in. working stroke		IR ARO Series 34 Electric / Pneumatic Drills .33 hp motor 150-330 ftlb. thrust 4.33 in. working stroke
CP Desoutter AFDE410 Electric Drill / Tapping Tool 1.0 hp motor 163 ftlb. thrust 330-9600 rpm 3.94 in. working stroke		IR ARO Series 54 Electric / Pneumatic Drills .50 hp motor 150-330 ftlb. thrust 4.33 in. working stroke
CP Desoutter AFDE610 Electric Drill / Tapping Tool 1.0 hp motor 350 ftlb. thrust 330-6300 rpm 3.94 in. working stroke		IR ARO Series 74 Electric / Pneumatic Drills .75 hp motor 150-330 ftlb. thrust 4.33 in. working stroke
CP Desoutter AFTE480 Electric Leadscrew Tapper 1.0 hp motor 39-317 inlbs. tapping torque 180-1740 rpm 2.36 in. working stroke		IR ARO 2200 Series Leadscrew Tappper .62 hp motor pneumatic fully automatic
CP Desoutter AFD205 Pneumatic Drill / Tapper .30 hp motor 90 ftlb. thrust 650-18,700 rpm 1.97 in. working stroke		IR ARO Par-A-Matic Peck Feed Drills .50 hp motor automatic pecking sequence
CP Desoutter AFD215 Pneumatic Drill / Tapper .30 hp motor 90 ftlb. thrust 650-18,700 rpm 3.43 in. working stroke		IR ARO Bant-A-Matic Self Feed Drills .25 hp motor manual or remote operation infinite stroke length settings muffled exhaust
CP Desoutter AFD415 Pneumatic Drill / Tapper .51 hp motor 159 ftlb. thrust 490 - 18,000 rpm 3.94 in. working stroke		IR ARO Par-A-Matic Self Feed Drills .50 hp motor manual or remote operation infinite stroke length settings muffled exhaust
CP Desoutter AFD625 Pneumatic Drill / Tapper .85 hp motor 350 ftlb. thrust 40-3,300 rpm 3.94 in. working stroke		IR ARO Super Par-A-Matic Drills .75 hp motor manual or remote operation infinite stroke length settings muffled exhaust
IR ARO Par-A-Matic Offset Self Feed Drills .50 hp motor for unusual part or fixture configurations		IR ARO 8670 Series High Thrust Drills 1.25 hp motor dual piston design fully automatic