- Air powered compression riveters deliver a squeezing action, which drives the rivet by “Flowing” the rivet metal with compressed forces. Squeezing action is obtained by coupling an air cylinder and piston to a wedge or cam, thus multiplying the original force to extreme ratios. High compressive forces are obtained from a relatively compact unit having small diameter cylinders and using very little compressed air.

- Extensively used in assembly of aircraft, trucks, buses, boats, appliances, automotive components, metal furniture, toys and electronic chassis.

- Actuation throttle guard - reduces the risk of accidental operation

- Short stroke adjustment - aids positioning of the tool (limits the return travel of the moving set of the tool on the rivet to reduce the starting clearance between rivet and rivet sets)

- rivet set type: CR-1

- aluminum capacity: 1/8"

- steel capacity: 3/32"

- std. yoke reach: 9  1/8"

- std. yoke closed height: 3/4"

- max force: 3000 lbs.

- moving plunger max travel: 1  11/16"

- final part of stroke at max force: .063"

- cylinder type: single

- noise level 96 dB(A)

- length: 25  3/4 inches

- weight: 26.25 lbs.

- ordering part no. T009582

- A CP Tools Chicago Pneumatic

quality compression riveter tool

- CLICK HERE for this tool's user manual