Pneumatic Tools Online: Chicago Pneumatic C-Yoke Compression Tools

Pneumatic Tools Online > CP Compression Tools > Specialty Compression Tools

CP Chicago Pneumatic Specialty Compression Tools

* Call us at 1-800-353-4676 for

pricing and information

CP0351-CABH-DY Edge Former Compression Tool

- Forming capacity (max material thickness) – Ø 6.4mm (1/4”)

- Rotary suspension bail fitted – eases handling and orientation of tool

- Use for a wide range of flattening of spot welded flanges and removing bends

- Custom yokes and dies can be used for crimping and staking operations

- Automatic cycling frequency is adjustable from 1 cycles per throttle actuation to, up to 200 cycles per minute whilst the throttle actuation is maintained

- aluminum capacity: 1/4"

- max cycles per minute: 200

- reach: 9/16"

- std. yoke closed height: 7/8"

- max compressive force: 6000 lbs.

- cylinder type: single

- noise level 96 dB(A)

- length: 17 1/2 inches

- weight: 20 5/16 lbs.

- ordering part no. T020475

- A CP Tools Chicago Pneumatic

quality compression tool

* Call us at 1-800-353-4676 for

pricing and information

CP-0351 PU Sheet Metal Punch Compression Tool

- Actuation throttle guard – reduces the risk of accidental operation

- Use for a wide range of punching operations where it is preferable to take the tool to the job eg. Large structures such as truck trailers

- Capacity:

Maximum hole is Ø 13mm (1/2”) relative to material thickness

Within maximum force of 24.0kN (5400lbs), material thickness should not exceed hole diameter.

To determine force required use formula: F = 3.14 x D x T x S

Where “F” is force (lbs); “D” is hole diameter (ins); “T” is thickness of material (ins); “S” is tensile strength of material (psi)

Or “F” is force (N); “D” is hole diameter (mm); “T” is thickness of material (mm); “S” is tensile strength of material (N/mm2)

- aluminum capacity: 3/16"

- hole diameter: 3/16"

- max distance edge of sheet to hole center: 1 7/8"

- std. yoke closed height: 7/8"

- max punching force: 5,400 lbs.

- work clearance punch retracted: 1/2"

- cylinder type: single

- noise level 96 dB(A)

- length: 21 1/2 inches

- weight: 20 1/2 lbs.

- Forming capacity (max material thickness) – Ø 6.4mm (1/4”)

- Rotary suspension bail fitted – eases handling and orientation of tool

- Use for a wide range of flattening of spot welded flanges and removing bends

- Custom yokes and dies can be used for crimping and staking operations

- Automatic cycling frequency is adjustable from 1 cycles per throttle actuation to, up to 200 cycles per minute whilst the throttle actuation is maintained

- noise level 96 dB(A)

- ordering part no. T020475

- A CP Tools Chicago Pneumatic

quality compression tool

- noise level 96 dB(A)

- ordering part no. T013417

- A CP Tools Chicago Pneumatic

quality compression tool